N Type 50 ohm rear mount bulkhead jack for direct solder to semi-rigid cable. The contact is gold plated as is the rear body for soldering to the copper jacket of the cable. The outer contact body, Hex nut and Locking Washer are made from passivated stainless steel the Solder Body is gold plated stainless steel . Fits a mounting hole with 2 flats. Suitable RG402 (0.141″) semi rigid and similar cables in group HB.
| Electrical Specification | Value |
|---|---|
| Impedance | 50 Ohm |
| Frequency Range | 18GHz |
| Dielectric Withstand Voltage | 1500 Veff |
| Insulation Resistance | 5000 M-Ohm |
| Mechanical Specification | Value |
|---|---|
| Design Standard | IEC 61169-8 |
| RoHS 3 Compliant | Yes |
| Centre Contact Termination | Solder |
| Outer Contact Termination | Solder |
| Mating Cycles | 500 |
| Contact Retention | 27N min |
| Cable Retention | 200N min |
| Weight | 32.34g |
| Mating Force | 6.6Ncm max |
| Un-Coupling Force | 6.6Ncm max |
| Environmental Specification | Value |
|---|---|
| Operating Temperature | -55 to +155 Deg C |
| IP Rating ( Mated ) | IP67 |
| Material | Value |
|---|---|
| Centre Contact | Beryllium Copper |
| Outer Contact | Stainless Steel |
| Insulator | PTFE |
| Centre Contact Plating | Gold |
| Outer Contact Plating | Passivated |
| Pack Size | 1 |
