MMCX 75 ohm full crimp bulkhead jack with single flat on the body for rear mounted D hole fixing. With gold plated centre contact and annealed crimp sleeve for reliable performance. Suitable for use with RG179 and similar cables in group AB.
Note : 50 and 75 Ohm version of MMCX connectors are not compatible and permanent damage to the connector may occur if mated.
| Electrical Specification | Value |
|---|---|
| Impedance | 75 Ohm |
| Frequency Range | Up to 6GHz |
| Dielectric Withstand Voltage | 500 Veff |
| Insulation Resistance | 1000 M-Ohm |
| Mechanical Specification | Value |
|---|---|
| Design Standard | IEC 122340 |
| RoHS 3 Compliant | Yes |
| Centre Contact Termination | Crimp |
| Outer Contact Termination | Crimp |
| Mating Cycles | 500 |
| Contact Retention | 7N min |
| Cable Retention | 60N min |
| Mating Force | 10N Max |
| Un-Coupling Force | 20N Max |
| Environmental Specification | Value |
|---|---|
| Operating Temperature | -55 to +155 Deg C |
| IP Rating ( Mated ) | IP40 |
| Material | Value |
|---|---|
| Centre Contact | Phosphor Bronze |
| Outer Contact | Phosphor Bronze |
| Insulator | PTFE |
| Centre Contact Plating | Gold |
| Outer Contact Plating | Gold |
| Pack Size | 1 |
