SMA End Launch Jack 1.1mm
PART No. 30-462-D3-1.1mm
Categories Connectors, SMA, SMA Jacks
SMA end launch PCB jack Suitable for soldering to a 1.0 mm thick PCB. Contact and body are gold plated.
SMA end launch PCB jack Suitable for soldering to a 1.0 mm thick PCB. Contact and body are gold plated.
Electrical Specification | Value |
---|---|
Impedance | 50 Ohm |
Frequency Range | 18GHz |
Dielectric Withstand Voltage | 750 Veff |
Insulation Resistance | 5000 M-Ohm |
Mechanical Specification | Value |
---|---|
Design Standard | IEC 60169-15 |
RoHS 3 Compliant | Yes |
Centre Contact Termination | Solder |
Outer Contact Termination | Solder |
Mating Cycles | 500 |
Contact Retention | 27N min |
Weight | 1.54g |
Mating Force | 23Ncn |
Un-Coupling Force | 23Ncn |
Environmental Specification | Value |
---|---|
Operating Temperature | -55 to +155 Deg C |
IP Rating ( Mated ) | IP40 |
Material | Value |
---|---|
Centre Contact | Beryllium Copper |
Outer Contact | Brass |
Insulator | PTFE |
Centre Contact Plating | Gold |
Outer Contact Plating | Gold |
Pack Size | 1 |