UHDC 43 full crimp plug for mounting on High Density distribution frames, suitable for BT3002 and similar cables in group BD. Gold plated inner and outer contact. UHDC 43 is identified by a violet locking clip fitted to the plug body. An extraction tool is required to remove plugs from the distribution frame.
| Electrical Specification | Value |
|---|---|
| Impedance | 75 Ohm |
| Frequency Range | DC 3GHz |
| Dielectric Withstand Voltage | 1500 Veff |
| Insulation Resistance | 5000 M-Ohm |
| Mechanical Specification | Value |
|---|---|
| Design Standard | BS9210F0022 (BT-RC8003) |
| RoHS 3 Compliant | Yes |
| Centre Contact Termination | Crimp |
| Outer Contact Termination | Crimp |
| Mating Cycles | 250 |
| Contact Retention | 22N min |
| Cable Retention | 220N min |
| Weight | 6.01g |
| Mating Force | 22N max |
| Un-Coupling Force | 22N max |
| Environmental Specification | Value |
|---|---|
| Operating Temperature | -55 to +155 Deg C |
| IP Rating ( Mated ) | IP30 |
| Material | Value |
|---|---|
| Centre Contact | Phosphor Bronze |
| Outer Contact | Brass |
| Insulator | PTFE |
| Centre Contact Plating | Gold |
| Outer Contact Plating | Gold |
| Pack Size | 25 |
| Centre Contact Crimp Tool | 96-HTS-43 |
| Outer Contact Crimp Tool | 96-HTS-43 |
| UHDC "T" Bar Extraction Tool | 96-310-833-Tool |
