N Type S/Steel Bulkhead Rear Mount Solder / Solder Jack ( 2 Flats )

25-217-H3-HB

N Type 50 ohm rear mount bulkhead jack for direct solder to semi-rigid cable. The contact is gold plated as is the rear body for soldering to the copper jacket of the cable. The outer contact body, Hex nut and Locking Washer are made from passivated stainless steel the Solder Body is gold plated stainless steel . Fits a mounting hole with 2 flats. Suitable RG402 (0.141") semi rigid and similar cables in group HB.

From £11.25 each ex VAT
1-9 = £16.34 |  10-24 = £15.28 |  25-49 = £13.24 |  50-99 = £12.49 |  +100 = £11.25

Quantity:       Buy Now Non-UK Customers

Want higher quantities?
Contact info@coaxdirect.com

Specification

Electrical Specification
Impedance 50 Ohm
Frequency Range 18GHz
Dielectric Withstand Voltage 1500 Veff
Insulation Resistance 5000 M-Ohm
Mechanical Specification
Design Standard IEC 61169-8
RoHS Compliant Yes
Centre Contact Termination Solder
Outer Contact Termination Solder
Mating Cycles 500
Contact Retention 27N min
Cable Retention 200N min
Weight 32.34g
Mating Force 6.6Ncm max
Un-Coupling Force 6.6Ncm max
Environmental Specification
Operating Temperature -55 to +155 Deg C
IP Rating ( Mated ) IP67
Materials
Centre Contact Beryllium Copper
Outer Contact Stainless Steel
Insulator PTFE
Centre Contact Plating Gold
Outer Contact Plating Passivated
Pack Size 1

Suitable for Cables in Group HB

Cable Type Cable GroupImpedance
Ohms
Jacket
O/D mm
Dielectric
Material
Dielectric
O/D mm

Centre Conductor
Material

Centre Conductor
O/D mm
Centre Conductor
Stranding mm

Shielding
Outer Conductor

RG402 (.141") HB 50 3.58 PTFE 3.02 SCCS 0.91 1/0.91 Solid Copper Tube

Performance

Performance Data available on request, please contact COAX

Assembly

Assembly Process AP033
Stripping Dimensions 25-279-SD
Centre Contact Solder
Outer Contact Solder

Accessories


Downloads

Interface Dimensions C-50-Ohm-N
Stripping Dimensions 25-279-SD
Data Sheet 25 217 H3 HB A00 0
Assembly Process AP033