N Type Solder / Clamp 75 Ohm Jack

25-050-B6-AI

N Type 75 ohm straight jack. With soldered centre contact and clamped braid and jacket this jack has a gold plated centre contact. Suitable for use with RG59 or similar cables in group AI.

Note : 50 and 75 Ohm versions of N Type are not compatible and permanent damage to the connector may occur if mated.

N Type 50 ohm are a rugged screw coupled, mid sized series of connectors, with versions available for use up to 11 GHz. N Type connector interface is according to Mil 30912 and are sealed to IP67 when mated. 75 ohm versions of N Type are also available.

Make an enquiry

Specification

Electrical Specification
Impedance	50 Ohm
Frequency Range	11GHz
Dielectric Withstand Voltage	1500 Veff
Insulation Resistance	5000 M-Ohm
Mechanical Specification
Design Standard	IEC 61169-8
RoHS Compliant	Yes
Centre Contact Termination	Solder
Outer Contact Termination	Clamp
Mating Cycles	500
Contact Retention	27N min
Cable Retention	150N min
Weight
Mating Force	6.6Ncm max
Un-Coupling Force	6.6Ncm max
Environmental Specification
Operating Temperature	-55 to +155 Deg C
IP Rating ( Mated )	IP67
Materials
Centre Contact	Phosphor Bronze
Outer Contact	Brass
Insulator	PTFE
Centre Contact Plating	Gold
Outer Contact Plating	Nickel
Pack Size	1

Suitable for Cables in Group AI - full cable information available here.

Cable Type	Cable Group	Impedance Ohms	Jacket O/D mm	Dielectric Material	Dielectric O/D mm	Centre Conductor Material	Centre Conductor O/D mm	Centre Conductor Stranding mm	Shielding Outer Conductor
KX30	AI	93	6.15	PE	3.71	BCCS	0.64	1/0.64	CopperBraid
KX52	AI	75	-	-	-	-	-	-	-
KX6	AI	75	6.1	PE	3.7	BC	0.6	7/0.20	CopperBraid
RG59	AI	75	6.15	PE	3.71	BCCS	0.57	1/0.57	CopperBraid
RG59U	AI	75	6.15	PE	3.71	BCCS	0.57	1/0.57	CopperBraid
RG62	AI	93	6.15	PE	3.71	BCCS	0.64	1/0.64	CopperBraid
URM104	AI	75	6	PE	-	-	0.64	1/0.64	CopperBraid
URM70	AI	75	5.8	PE	3.25	TC	0.6	7/0.20	CopperBraid

Build your own assembly with our Cable Configurator

Open Configurator

Performance

Performance Data available on request, please contact COAX

On request, please contact COAX

Assembly

Assembly Process	AP016
Centre Contact	Solder
Outer Contact	Clamp
General Notes	CD 0015

Accessories

Rotary Cable Stripper

96-312B

Downloads

Interface Dimensions	C-75-Ohm-N
Assembly Process	AP016
General Notes	CD 0015